If you were given $5000.00 to spend on your Mach......
#21
(06-12-2010, 06:48 AM)Mach1Guy Wrote:
(05-29-2010, 12:47 PM)70bluemach1 Wrote: Hello,

New member here.

If I had 5K, I would balance and blueprint the engine, and get a Detroit locker rear.

John

Sounds like a great way to blow away a good part of 5000.00 :)

I have a 1969 Mach 1, which needs restored. It would be close, but I would want a shaker hood and scoop, tach dash and a fold-down rear seat.

Reply
#22
For Christmas this year my wife and mother-in-law combined to allow me to purchase 1.5k of parts for the 1973 Mach 1 in my garage. I can honestly say that I have now completed the inventory for the full restoration of the interior plus some much needed engine parts. With thanks to Ponypastor the interior will now be completed this spring.

5k more will allow me to get the exterior painted and the new tires for the car.
Reply
#23
I just spent $4800 straightening the chassis of our '73 after crashing out in Targa Tasmania, on day 1 of a 6 day tarmac rally. We are also about to spend $3000 on heads, $3000+ on crank, rods and pistons, $2000 on bits and bobs for the grill ... aaarrrggghhh.
If i was given $5000 to spend on my Mustang, I think I would have to go to a Casino to try to make it $20,000!
Reply
#24
I'd buy as many barrels of Sunoco racing fuel as $5,000 would buy.
Reply
#25
Yes, I would spend it on my Mach 1!

5 speed tranny install, motor updates and new rubber. Should just about cancel the budget.
Reply
#26
I would start with rebuilding the front suspension and steering then see what I had left.
Reply
#27
If I was given 5000.00, I might be able to find the rattle in the suspension that I have been hunting for 3 years nowSadcry I'd just stop looking and replace everything in the front end and rear end that I could unbolt!
Reply
#28
Paint for sure.
Reply
#29
(06-24-2011, 09:00 AM)Peter Winn Wrote: If i was given $5000 to spend on my Mustang, I think I would have to go to a Casino to try to make it $20,000!

Really wanna know how that works out for you :)
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  smooth window operation on 70 Mach CUSTOMMISER 2 1,718 08-15-2022, 12:10 PM
Last Post: CUSTOMMISER
  Is your Mach 1 on Google Earth Street View? Rare Pony 2 2,015 03-05-2022, 07:30 AM
Last Post: Rare Pony
  72 Mach 1 Power Steering Pressure Hose Jelly 1 3,056 11-07-2021, 08:42 AM
Last Post: JTS71 Mach1
  Turn signal electrical issue 1970 Mach 1 flananuts 2 2,681 10-21-2021, 09:01 PM
Last Post: flananuts
  '03 Mach 1 fuel pump skidmarky 1 2,829 04-29-2021, 11:06 PM
Last Post: JTS71 Mach1
  69 Mach 1 rear seat install RostaRob 8 18,937 06-29-2019, 02:44 AM
Last Post: rindel
  How much of your Mach 1 have you replaced? Mister 4x4 8 18,589 07-13-2018, 08:45 AM
Last Post: Steven Harris
  1970 Mach 1 Hood tach rlincoln0814 15 30,437 03-08-2018, 03:53 AM
Last Post: 1969_Mach1
  69 MACH 1 fuel cap? noroz 6 20,839 06-06-2015, 03:51 AM
Last Post: 1969_Mach1
  04 Mach 1 exhaust rattle Bogie#7 11 31,507 05-30-2015, 05:47 PM
Last Post: 1969_Mach1

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 152580
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 2459
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 4541
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9321
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2193
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1685
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 789
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 2187
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 159084
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1256
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3406
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1762
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1718
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 9255
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1907
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3745
What's One More Iron In The Fire!
Last Post: Steven Harris
07-22-2022 01:39 PM
» Replies: 124
» Views: 241213
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 22505
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1858
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15594

>