ABS Control Module
#1
ABS light on and traction control light on.  Have error C1145 and C1266.  Replaced the front right wheel speed sensor, still have both codes.  I'm guessing next step is to replace the ABS control module?  Is there a good place to send the old one in to get remanufactured, or send in to get a remanufactured pard?  I don't want to just grab one on e-bay--who knows if it will be good. 

Also, any good videos around to show how to actually do it?  The one I found had a broken link. 

Thanks. Crazy
Reply
#2
Hey Stuffbert, Welcome 

It would help if you'd give us some idea of what you're working on, and we'll know if we can help you. This site is about the Mach 1 Mustangs. Which were produced in 1969 through 1973, then again in 1978, then again in 2003, and 2004. I'm just guessing you must have a 2003, or 2004 as those are the only years that could have had antilock brakes, to my knowledge. So help us out, and tell us what you've got, and we'll see what we can do. 

JTS
Reply
#3
After a quick look on the internet. It showed c1145 is for the right front wheel speed sensor. You said you replaced it. So 1 of 2 things. You didn't install it correctly, I believe that would be the older style that you had to install it into the housing, and tap it gently until it touches the back / tone wheel on the rotor. It's been a very long time since I've messed with one that old. #2 if installed correctly you can run an ohm test on the sensor, I believe it should have about 1200 to 1400 ohms. If it shows an open the wires are broke somewhere. The other test you can do is put your multi meter on the lowest dc volt scale and spin the wheel for that sensor and you should get a voltage reading to show it is close enough to the tone wheel and is reading it. If you get no reading. you may have a broken or damaged tone wheel. As for the c1266 it would appear as that is going to require a new module. I don't have a clue if there is any one who remanufactures them ????? Try Rock Auto.com as they have just about everything, and are quite reasonable. Good Luck
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238165
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150942
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1713
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3974
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9116
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2005
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1469
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 642
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1972
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157100
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1088
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3013
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1503
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1482
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8732
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1723
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3419
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21309
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1686
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15093

>