1969 mustang wiring diagram
#1
chassis diagram


Attached Files
.pdf   1969 mustang diagram chassis.pdf (Size: 192.65 KB / Downloads: 269)
Reply
#2
hope this helps me I'm working on a 69 mach 1 just put a new wiring harness in from firewall out, when i turn the key to "on" position it tries to crank....someone has been doing some "homemade" wiring on the car so who knows what I'll get into. any comments and/or suggestions would be a help. Car was wrecked on the right front real bad, had to replace from right lower firewall out and rails on both sides, new aprons and rad support.
Reply
#3
(01-19-2011, 11:26 AM)CHRIS_b Wrote: hope this helps me I'm working on a 69 mach 1 just put a new wiring harness in from firewall out, when i turn the key to "on" position it tries to crank....someone has been doing some "homemade" wiring on the car so who knows what I'll get into. any comments and/or suggestions would be a help. Car was wrecked on the right front real bad, had to replace from right lower firewall out and rails on both sides, new aprons and rad support.

Chris can you be more specific what do you mean it trys to crank? it clicks or it turns over dont start?If it just clicks coul be ground or solenoid maybe.Turns not start possibly no spark.possible wires to coil,distributor,maybe from ignition switch.need a little more info.
Reply
#4
If the engine is cranking, i.e. the cooling fan is turning when you turn the ignition key, fuel can be an issue too besides getting a spark. These old cars do not have electric fuel pumps and are harder to start. You usually need to pump the gas pedal several times to get the gas flowing. Make sure the automatic choke on the carb is closed too. Good luck.
Reply
#5
Hi Jim,

Many thanks for the diagram i'll give this ago to see how i get on. most of the wiring seems ok its just some minor problems i need to fix.

Regards,

Tony
Reply
#6
(08-23-2011, 04:21 AM)Leadfoot Tony Wrote: Hi Jim,

Many thanks for the diagram i'll give this ago to see how i get on. most of the wiring seems ok its just some minor problems i need to fix.

Regards,

Tony

No problem Tony good luck on your problems.Be sure to check your grounds.Seems like alot of electrical issues start at bad grounds.
Reply
#7
(08-24-2011, 08:27 PM)1969jimmach Wrote:
(08-23-2011, 04:21 AM)Leadfoot Tony Wrote: Hi Jim,

Many thanks for the diagram i'll give this ago to see how i get on. most of the wiring seems ok its just some minor problems i need to fix.

Regards,

Tony

No problem Tony good luck on your problems.Be sure to check your grounds.Seems like alot of electrical issues start at bad grounds.

Looks good to me also, RATS, yes rats got under the hood and enjoyed the taste of some of my wires.
Reply
#8
Welcome Bart.

Yes - rats, mice and various other critters can certainly put the hurt on car wiring. I bought a parts car that had the carb full of dirt from field mice and they had eaten all wires including the plug wires.
Reply
#9
(01-09-2012, 05:29 AM)bartmcneill Wrote:
(08-24-2011, 08:27 PM)1969jimmach Wrote:
(08-23-2011, 04:21 AM)Leadfoot Tony Wrote: Hi Jim,

Many thanks for the diagram i'll give this ago to see how i get on. most of the wiring seems ok its just some minor problems i need to fix.

Regards,

Tony

No problem Tony good luck on your problems.Be sure to check your grounds.Seems like alot of electrical issues start at bad grounds.

Looks good to me also, RATS, yes rats got under the hood and enjoyed the taste of some of my wires.

Yeah you think they are bad in cars you should work on farm equipment like I do grain really attracts them. good luck and welcome.
Reply
#10
Hope these diagrams help with my many problems
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1970 mustang wiring diagram 1969jimmach 2 28,467 12-13-2020, 01:17 PM
Last Post: Woofers
  Tachometer Wiring Mustangmike 10 19,303 12-19-2018, 08:39 PM
Last Post: Mustangmike
  Scott Drake L.E.D. Dash Upgrade from Sacramento Mustang Mach 1 Club 0 5,559 10-07-2018, 12:02 PM
Last Post: Mach 1 Club
  1969 Mustang Mach1 clock and dash gauge repair Mach 1 Club 1 6,728 10-04-2018, 09:32 AM
Last Post: JTS71 Mach1
  1971 mustang diagram 1969jimmach 1 13,280 07-03-2014, 10:07 AM
Last Post: jomama599
  1972 mustang diagram 1969jimmach 10 34,574 05-28-2014, 01:32 AM
Last Post: Steven Harris
  How To Replace '65-'73 Mustang Ignition Switches Mach 1 Club 0 8,148 01-10-2014, 02:46 PM
Last Post: Mach 1 Club
  Classic Mustang Interval Wiper Switch Install - How To Install Interval Wipers Mach 1 Club 0 8,328 01-10-2014, 02:42 PM
Last Post: Mach 1 Club
  72/'73 MUSTANG CHASSIS WIRING Mach 1 Club 1 9,756 12-23-2011, 03:07 AM
Last Post: Steven Harris
  Shedding The Light 1969 1970 Mustangs Mach 1 Club 0 7,357 12-20-2011, 04:55 AM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238060
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150863
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1688
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3957
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9109
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1995
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1466
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157029
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2996
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1498
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1474
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8718
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1719
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21264
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1685
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15080

>