!Manual clutch assembly
#1
We are in the processing of fixing up a hack job on a 1973 Mach . When we took this car in, the owner hired someone who obviously didn't know what they were doing to replace the auto tranny with a 4 speed manual. We have replaced the whole clutch, bell housing and shield and had to order a new Hurst installation kit because the previous person hack off over 1 inch on the reverse rod. It also came in with the cable set up which I know is not common in this car. So here is what I am looking for, I need the mechanical parts from the clutch pedal including bushings up to the clutch fork. Does anyone know where I can get these?
Reply
#2
For reproduction parts you can try National Parts Depot. They have most, if not all, the reproduction clutch linkage parts in their catalog. For used parts, you can try Perogie Enterprises in New Jersey. I not 100% certain Perogie has parts for 73 or not. I've purchased used and NOS parts from Perogie for my 69 Mach 1. Perogie is not the cheapest priced place. But, most of the time they know what parts you need for a particular project eliminating some legwork on your part.

Best Regards,
Mike
Reply
#3
Give Don at Ohio Mustangs a shout. He'll have what you need. He should be along any time, as he's a member here. Hope it helps JTS 71 Mach1
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  clutch pedal spring? mlp40 4 15,174 08-26-2014, 05:05 AM
Last Post: Steven Harris
  FMX to T5 swap, no clutch bar hole Monticore 6 20,271 11-05-2012, 11:22 PM
Last Post: JTS71 Mach1

Forum Jump:


Users browsing this thread: 2 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238148
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150932
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1707
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3966
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9115
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2003
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1468
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 641
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1971
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157085
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1087
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3008
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1501
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1482
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8729
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1722
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3411
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21303
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1686
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15090

>