!Manual clutch assembly

[jtuthill]

We are in the processing of fixing up a hack job on a 1973 Mach . When we took this car in, the owner hired someone who obviously didn't know what they were doing to replace the auto tranny with a 4 speed manual. We have replaced the whole clutch, bell housing and shield and had to order a new Hurst installation kit because the previous person hack off over 1 inch on the reverse rod. It also came in with the cable set up which I know is not common in this car. So here is what I am looking for, I need the mechanical parts from the clutch pedal including bushings up to the clutch fork. Does anyone know where I can get these?

[1969_Mach1]

For reproduction parts you can try National Parts Depot. They have most, if not all, the reproduction clutch linkage parts in their catalog. For used parts, you can try Perogie Enterprises in New Jersey. I not 100% certain Perogie has parts for 73 or not. I've purchased used and NOS parts from Perogie for my 69 Mach 1. Perogie is not the cheapest priced place. But, most of the time they know what parts you need for a particular project eliminating some legwork on your part.

Best Regards,
Mike

[JTS71 Mach1]

Give Don at Ohio Mustangs a shout. He'll have what you need. He should be along any time, as he's a member here. Hope it helps JTS 71 Mach1