Posts: 86
Threads: 18
Joined: Apr 2014
Posts: 2,305
Threads: 44
Joined: May 2012
Awesome job! The motor looks factory fresh. I like the roll bar too. My friend gave me a roll bar for my car and I am contemplating installing it. It is hard to tell from the pictures but did you weld it to the top of the torque for a permanent installation or is there type of bracket where you can remove the roll bar?
The car is progressing nicely!
Posts: 86
Threads: 18
Joined: Apr 2014
Thanks, the roll bar/ style bar, is just basically to hold the retractors, It doesnt go to the floor, but it woulnt be a hard modification with some pipe and a welder.
The fittment is basic, you just use the old seat belt holes for the top mounts.
The lowers you have to screw the half box mount to the hole drilled and tapped into the bottom of the bar and you attach the assembly to a factory pre drilled hole in the panel that the quarter interior panels attach to, Its best to fit a thick plate behind this panel for extra support behind the nut.