new member looking for advice
#21
Welcome from West Texas!

You should check with Don at Ohio Mustang Supply. He has some donor cars on-hand for hard-to-find parts, as well as is very hooked up in the biz, and would know where to find things if he doesn't actually have them on-hand.

Good luck - looks like it's going to be an awesome car!
Reply
#22
Thanks for the advice. Hopefully I can get these parts and get it running by spring. I have had this car for far too long and I wanna be able to drive it and enjoy it.
Reply
#23
Are you looking for the seat brackets that secure the rear seat or the brackets that secure the fiberglass panels, or both?
Reply
#24
Mister 4x4 thanks for the advice for ohio mustang supply. I called today after hours so i am going to call tomorrow or monday.
Mustangmike, I am looking for both of those brackets. I am having a hard time finding both of them. I am glad for this site because I got a good lead on where to go and I am very thankful. Thank you all.
Reply
#25
Gday I,m in Atlanta have a mach 1 yellow 73 , need to know a good paint shop , that can do rust original colour stickers and put in an interior kit , im up in Duluth but any place in Atlanta that can be recommended is welcom
Reply
#26
Well, I tried ohio mustang supply and Don said he does mostly 71-73 and referred me to Perogies enterprise new jersey and they didn't have the parts I need. It's looks like I am going to have to find a machine shop make the parts I need.
Reply
#27
(11-16-2012, 04:34 AM)Mach 1 Club Wrote: Id recommend getting ALL mechanical in line before painting providing the car is already structurally sound.
Id do mechanical then paint and body and then interior. In that order.
You don't want a mechanic scratching the new paint first, and you don't want a dirty painter sitting in new interior. Smile

ABSOLUTELY due yours in this order! I promise you will not be disappointed you did. I just finished my car , well mostly, doing all the work myself. I watched a buddy of mine who farmed his car out and they did the paint and body work first, well after doing the mechanicals there was several scratches, dings ect to the paint work. It is just unavoidable no matter how careful you are. Think about it this way you the car to run & drive to make it easy to move around while working on it so why not get that right first, then move on to body & paint and taking the interior apart because you will probably want to replace door seals, window felt ect and if painting you get a way more thorough and much better quality job if you paint with all that removed. Just my opinion.
YLWHRSE
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  New member from San Jose, CA jbhoot 12 4,435 05-09-2023, 08:39 AM
Last Post: JTS71 Mach1
  New Member Phillip Morris 2 1,653 08-20-2022, 11:18 AM
Last Post: JTS71 Mach1
  New member and Mach 1 owner bterry29 3 3,038 02-09-2022, 02:06 PM
Last Post: JTS71 Mach1
  New Member with New Mach1 BigE 2 2,300 01-27-2022, 12:29 PM
Last Post: JTS71 Mach1
  New member from Virginia, 23322 seu318 3 2,668 01-26-2022, 03:57 AM
Last Post: JTS71 Mach1
  New member mccuner 4 3,454 09-18-2021, 07:09 AM
Last Post: Steven Harris
  New Member, New Stang, New Questions Wyatt 3 3,259 09-18-2021, 06:51 AM
Last Post: Steven Harris
Wink New Member Equip 2000 4 3,542 09-09-2021, 10:01 AM
Last Post: JTS71 Mach1
  new member here NoOnesHero 6 8,295 03-15-2021, 04:30 AM
Last Post: 390mach1
  New Member in New Zealand Mustang64 5 4,827 03-13-2021, 12:47 PM
Last Post: Mustang64

Forum Jump:


Users browsing this thread: 2 Guest(s)
[-]
Latest Threads
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 152355
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 2302
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 4435
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9273
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2133
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1631
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 747
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 2111
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 158833
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1214
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3331
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1653
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1634
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 9158
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1835
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3628
What's One More Iron In The Fire!
Last Post: Steven Harris
07-22-2022 01:39 PM
» Replies: 124
» Views: 240936
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 22316
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1788
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15490

>