07-30-2011, 11:02 AM
(07-29-2011, 11:51 AM)mymachone Wrote:(07-29-2011, 11:44 AM)1969jimmach Wrote:(07-29-2011, 10:36 AM)mymachone Wrote: Well the probelm is fixed ! After deciding it was the carb , I called Edelbrock for tech advice. Nothing they told me to do fixed the problem , so i went out and bought new carb and guess what ? it drives with stalling.
I even rebuilt the edel Carb , so not sure all was wrong./
Thanks everyone
So it does or doesnt stall anymore. By the way you worded your last response?
No stalling , yes some times I write faster than what makes sense.
I had rebuilt the carb awhile back as the floats were stuck open . anyhow after the rebuild , I installed the carb and it worked very well but the engine would would stall when put into drive or reverse .. After hrs of trying to find answers here and else where , I had no luck with anything that I tryed , so i called Tech service at Eldebrock , they gave me a few things to do and nothing helped there either. So i decided it was a carb problem and wanted it fixed. Hence the new carb. The new carb took care of the stalling problem the miss firing issue and also the burning rich issue.
That would have been my response also was carb.I have seen a lot of issues especially if they sit alot.I work on tractors and they are the same way.Glad you have it taken care of.