1971 M code the falconman's Mach 1
#21
Hi, info you needed
Filter # 2116 napa
breather # 2991 napa
screws are 10 - 24 X 5/8 with 5/16 hex head
Can use 1/2 up to 1 inch long
Thanks Don
Reply
#22
THANKS DON!!!! Air Cleaner fit like a glove...gotta go get the bolts and the breather, but it's on and grabbing that air!!!!!...I also still need those new front bumper brackets, web site say you have none, call you all tomorrow...I changed the wheels, as I am driving it, little by little around here, but not much due to the lack of the bumper...also need to install the spoilers...cleaned it a bit, and making my final parts list...I will have it done before I head to SEMA......

[Image: 2011-09-25_15-36-36_889-1.jpg]

[Image: 2011-09-25_15-37-52_311.jpg]
Reply
#23
Looks and sounds like you making great progress. I bet driving it around some helps keep the interest up!
Reply
#24
(08-01-2011, 11:56 AM)Steven Harris Wrote: Nice to see and hear the progress. I will stay tuned in.

Do you have fitment issues w/ your wheels?
Reply
#25
(09-27-2011, 10:09 PM)mikesanto70 Wrote:
(08-01-2011, 11:56 AM)Steven Harris Wrote: Nice to see and hear the progress. I will stay tuned in.

Do you have fitment issues w/ your wheels?


No they fit fine and ride nice, Don called NO BUMPER BRACKETS...so I punted..I got them from Kentucky Mustang, so by Sunday night hope to have the Bumper and Chin Spolier on and the rear spoiler...

NEXT REAR WINDOW LOUVER!!!!!

[Image: 2011-09-25_15-36-36_889-1.jpg]

Reply
#26
weather turned cold here in Ohio, I did get the bumper on, and been driving it, hopeto pull it in this weekend, and put the spoilers on, front and rear, hook up heater hoses and wire that 8 track up, been driving it...I have sold a few of the cars, so I may do a few more things to the Mach over the winter...

[Image: 2011-11-26_16-52-14_586-1.jpg]

[Image: 2011-11-26_16-52-29_979.jpg]

Even got the door panels-mirror on....

[Image: 2011-11-26_16-53-19_268.jpg]
Reply
#27
Looks a lot better with the bumper on. What 8 track tapes do you listen too?
Reply
#28
(12-15-2011, 11:24 AM)Rare Pony Wrote: Looks a lot better with the bumper on. What 8 track tapes do you listen too?

All the good 70's-80's stuff....I am old.....

AC/DC, Black Sabbath, Alice Cooper, you know....and some Classic Country and some R&B.....I used to work at a few radio stations back in the day...so BIG music head here....have 3 cases FULL of 8 tracks...even have one in my 1970-1/2 Falcon.....

Reply
#29
Well...dude offered my the 9500 for the Stang...I just couldn't do it, after the added work I've done, and driving it, I guess I will park it next to my Falcons and 66 2+2.....So not selling....I will be doing more over the winter...
Reply
#30
Kind of glad to hear that your not selling. I am looking forward to seeing what gets done over the winter.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  The Mach 1 in 79 bob.harlan 3 9,156 04-16-2020, 11:36 PM
Last Post: BLACK JADE 69
  1971 Mach-1 - Sell or finish? CCinPA 31 45,358 10-19-2019, 01:32 AM
Last Post: CCinPA
  FINALLY RESTORED MACH 1 Jonner B 12 18,656 10-04-2019, 09:56 AM
Last Post: JTS71 Mach1
Lightbulb 1971 Mach 1 Restoration Project iglo1234 13 37,232 12-16-2017, 03:40 PM
Last Post: Steven Harris
  progress on 1969 Mach 1 1969jimmach 52 148,246 08-02-2017, 10:41 PM
Last Post: JTS71 Mach1
  '71 M-Code Mach 1 Restoration jrpav 68 171,726 01-08-2017, 04:14 AM
Last Post: jrpav
  1969 mach 1 351w 4v fmx trans rindel 3 14,426 03-27-2016, 11:15 PM
Last Post: Mustangmike
  1969 Mach 1 Pictures 1969_Mach1 34 84,550 03-24-2016, 07:40 AM
Last Post: 1969_Mach1
  72 Mach 1 restoration Juedu2 109 255,432 01-23-2016, 01:29 AM
Last Post: Juedu2
  My 72 Mach 1 paint & body-Primer work ylwhrse 5 20,067 06-27-2015, 02:12 PM
Last Post: ylwhrse

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238079
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150878
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1689
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3957
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9113
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2002
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1466
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1966
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157036
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1087
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3001
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1499
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1477
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8721
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1719
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3404
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21267
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1685
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15085

>