07-30-2011, 07:30 PM
I thought I would have another go at this today as I want to go to a show in two weeks and I have to leave early and it is still cool here in the mornings at the moment.
It looks like I have got it this time I bent the bracket that clamps the outer sheath to line up with the linkage, it was not exactly lined up and I cut the outer sheath back a little bit more as it had a little bit of a bend in it as well. I made sure the inner cable was straight where it slid in and out and lubed the two ends to help it slide better. It is good now so hopefully will stay that way.
Its not a Mustang show but a Corvette show They support our club when we have a show and other events so some of us are going down to support them.
It looks like I have got it this time I bent the bracket that clamps the outer sheath to line up with the linkage, it was not exactly lined up and I cut the outer sheath back a little bit more as it had a little bit of a bend in it as well. I made sure the inner cable was straight where it slid in and out and lubed the two ends to help it slide better. It is good now so hopefully will stay that way.
Its not a Mustang show but a Corvette show They support our club when we have a show and other events so some of us are going down to support them.