03-26-2011, 11:24 AM
OK!!! done for the day, went ahead and stripped all the EPT coating that was on the floor pan, remover the filler I used to smooth out the welds. I proceeded to clean the entire floor with a wire wheel on my grinder then scuffed the floor with 220 sand paper and applied my first coat of chassis saver( I hope this does what is claims to do). The only issue I'm having is either to use duraglass on the welds to try to make the floor smooth or just leave it alone ( I'm intending to use some type of truck bed liner coating Monstaliner is from the same company that make the chassis saver). Well here are my pics you can see how the rear passenger floor pan section turned out.