Upgrade A 1971-1973 Ford Mustang Mach 1 Rearend & Suspension
#1
For those who dig '71-'73 Mustang performance, here's a couple of handling solutions from Mustangs Plus and Bill Thomas Enterprises. Mustangs Plus gets it right with a selection of cool suspension components. Bill Thomas Enterprises has the talent and goods to build everything from a stock differential to a brute chunk that can take 700 hp. Randy's Ring & Pinion is setting us up with the hard parts necessary to make it happen.

[Image: mump_0712_01_z+mustang+.jpg]

Fourth-generation '71-'73 Mustangs get a lot of criticism for their size and weight, but they aren't much different from '65-'70 Mustangs. Up front, the '71-'73 models employ a Maverick/ Torino/Fairlane unit body structure intended to accommodate big horsepower planned for these cars during the late '60s. Open the hood on a '71-'73 and you'll see big shock towers and a large engine compartment. Insurance rates and government regulations killed the big engines and horsepower that Ford had planned for the Mustang beyond 1971. After the '71 429 Cobra Jet and Boss 351, the horsepower wars came to an end. That doesn't mean you can't get more out of a non-Boss or CJ '71-'73 Mustang. These wide-track models are long on potential and make great road cars.

At the rear, you can ditch the worn-out elliptical four-leaf springs and get into stiffer five-leaf, mideye, down-low performance. Opt for rubber or urethane bushings, depending on the caliber of performance wanted. What's more, choose the right shock absorber for the desired balance of ride and handling. Mustangs Plus offers standard gas shocks, which yield a smooth ride with good handling. KYB gas adjustable shocks from Mustangs Plus offer a stiffer ride with better handling.

When it's time to fit a '71-'73 Mustang with a new rear suspension system, it's wise to consider Ford's heavy-duty 9-inch rearend if you're planning big horsepower and torque gains. The standard 8-inch rearend can stand up to 350 hp, but not continuously without giving up the ghost. For street and weekend strip use, you'll want a four-pinion 9-inch limited-slip for durability and to get as much torque to the ground as possible. Randy's Ring & Pinion offers the 28-spline (PN YDGF-28-SM) or 31-spline (PN YDGF-31-SM) Trac Loc differential for street and strip use. Because it's made from machined billet steel, it's much stronger than a comparable four-pinion Ford unit.

We're fitting a '71 Mustang SportsRoof with stronger underpinnings in front and back. In front, we've already installed a Grab-A-Trak suspension with 620 coils and gas shocks. In back, we're installing five-leaf, mideye springs with gas shocks for an exceptional ride and moderate handling. As we said earlier, shock dampening determines ride. Because a smooth ride was priority, we opted for standard Grab-A-Trak gas shocks instead of stiffer KYBs. The result will be improved handling and a nice ride.

We began our efforts at Bill Thomas Enterprises, building an N-case nodular iron 9-inch Ford differential with 3.55:1 gears from Randy's Ring & Pinion. We've chosen 3.55:1 gears because the owner is going to install an automatic overdrive transmission behind his gutsy 302ci V-8 mill from Trans Am Racing.

READ MORE ON THIS ARTICLE HERE
Reply
#2
Alot of the 71-73s came with the very strong c6,9" combo, we are already well on the way to a great drivetrain combo.
Reply
#3
I would add to this - replace that lame 5/8 inch front anti-sway bar with a 1.25 inch bar and a 3/4 inch bar on the rear.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Base suspension alignment/setup asgraff 1 1,643 04-27-2022, 11:49 AM
Last Post: JTS71 Mach1
  comp. suspension...I can't take the suspense... keith1562 3 10,990 02-18-2016, 01:37 AM
Last Post: Steven Harris
  Aftermarket Aluminum Wheels for 1973 Mach 1 6foot4 19 41,456 05-01-2015, 03:17 AM
Last Post: mrmach1
  1973 Mach I Forged Aluminum Wheels Entraptor 10 29,663 11-20-2014, 10:20 AM
Last Post: Lifizgud
  Install a Power Brake Booster on a 71-73 Mustang Mach 1 Club 2 16,141 08-24-2014, 01:55 PM
Last Post: Steven Harris
  Upgrade A '71-'73 Rearend And Suspension Mach 1 Club 0 7,408 01-10-2014, 02:21 PM
Last Post: Mach 1 Club
  8.8 rear end in 1971 mach 1 turtle5353 16 42,978 09-17-2013, 01:32 AM
Last Post: turtle5353
  17 X 11 WHEELS on 72 mach 1 GREEN72MACH1 10 31,697 07-27-2012, 11:21 AM
Last Post: GREEN72MACH1
  72 comp. suspension keith1562 6 16,484 06-26-2012, 03:25 AM
Last Post: gxr02190
  Mach 1 Sway Bar Bluemach 3 16,507 05-10-2012, 08:03 PM
Last Post: Bluemach

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238038
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150593
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1680
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3953
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1993
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1465
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157001
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2992
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1498
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1471
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8682
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1719
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21116
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15078

>