1970 Bad Ass Mach 1 resto beast!
#1
   
1970 Ford Mustang Mach 1 521 Super Cobra Jet, killer Mustang has to be seen to be believed. Someone spent an incredible amount of time and money transforming this fastback into an incredible street brawler packing 521 cubic inches of Super Cobra Jet V8, then painted it in gorgeous 1993 Mustang Electric Red Clearcoat Metallic paint for a truly custom look. And if that wasn’t enough, they added a decal package inspired by the rare “Twister Special” Mustangs sold in Kansas. The end result is a Mustang that runs like it has a jet engine in the trunk and looks like a million bucks.

   

In that “definitely not from the ‘70s” color, this Mustang looks sophisticated and modern, and you almost think that something other than the color has been changed. But no, all the sheet metal is in place just where Ford stylists put it, and it has been fully trimmed with all the original bits and pieces. The bodywork is excellent on this car, straightened and aligned to factory standards, then block sanded to make sure everything was good and flat before any paint was sprayed. Then the 2-stage Electric Red went on, and it is a subtle, understated color that is more of a burgundy candy than a bright red—I have it on my own Mustang and it gets A LOT of compliments from people who just don’t believe it’s factory paint. This car has also been dressed up with decals that are a kind of blend of the Mach 1 decals and those from a batch of 96 1970 Mustangs called “Twister Specials” that were built for dealers in Kansas. So no, they’re not 100% authentic for this car, but they are representative of the builder’s vision, which is all that matters here. Or perhaps his vision of a 600 horsepower big block under the hood is just too much for you?

   

At any rate, the rest of the trim in this car is very good. The stainless has been buffed, the chrome front and rear bumpers are fresh, and dig the trick billet aluminum hood pins. The factory satin black parts like the rear wing, chin spoiler, and window louvers are a deep satin black, and the blacked-out grille is in excellent condition. The glass is tinted all around and is scratch-free, while out back, new taillight lenses look awesome in that blacked-out tail panel.

This car started out with a 302 with a 2-barrel carburetor, but under the hood today you’ll find this car’s true calling card: a 521 cubic inch 429 Super Cobra Jet. With 4-bolt mains, it was bored .030” over, then stuffed with a 4.3 inch 4340 forged steel stroker crank. A set of forged H-beam rods swing forged aluminum pistons from Probe. The heads are aluminum Cobra Jet units from Ford Motorsport with stainless valves, dual valve springs with dampers, stainless roller rockers and a Comp Cams stud girdle. The cam is a Doug Herbert .680 lift solid roller unit, and induction is handled by an Edelbrock manifold and a 750 CFM Holley 4150 Stage III carb modified by Willy’s Carb & Dyno Service. Ignition is by MSD. Surprisingly, it starts easily, idles well, and drives very nicely—you could put your mother behind the wheel of this beast and send her to the store without any worries.

The rest of the engine compartment is dressed for show duty, so this isn’t just a drag strip terror. You’ll notice that the shiny exterior 2-stage paint continues to the engine bay, making a perfect background for the black-clad big block engine. That’s real braided stainless hose, not the cheesy slip-over dress-up stuff, and dig the trick bolts and washers used on the inner fenders. Up top, a real Cobra Jet shaker hood scoop feeds the beast and a set of giant long-tube headers handle the exhaust chores. For reliability, a dual oil filter setup has been installed, and a positively huge aluminum radiator is used up front to keep it all cool with the assistance of an electric pusher fan as well as coolers for both engine oil and the transmission. Billet aluminum hinges with pneumatic struts open and close the hood, and a pair of trick shock tower braces keep the front end aligned under the stress of all that power.

The engine is backed by a built C6 3-speed automatic that is more than up to the task of handling all that horsepower and torque. The C6 is one of the most durable automatics out there, and properly set-up can handle as much as 1000 horsepower, so it should be right at home behind this potent big block. While you’re exploring the chassis, check out those trick long-tube headers that spread the exhaust pulses evenly between both sets of pipes—a racing trick designed to eke out every last horsepower from the engine. The rest of the exhaust is 100% stainless steel and features an X-pipe and Magnaflow mufflers for the right sound. You’ll find everything else is properly finished undercoated for longevity and a quiet passenger compartment, as well as a fully rebuilt suspension.

There are disc brakes at all four corners, and a Strange Engineering 9-inch rear with 3.50 gears and Trac-Lok out back. Strange also supplied the axles, pinion yoke, slip yoke, and driveshaft, completing this bulletproof drivetrain combination. There’s a new KYB shock at each corner, and a new gas tank in the back. 15-inch Magnum 500 wheels with Mickey Thompson rubber finish the look, and they are exactly right on this mixture of new and old Mustang.

The interior is a black leather lined cocoon of luxury and comfort. The black leather seats are from a late-model Cobra Mustang, while the steering wheel is a new leather-wrapped unit. A full roll cage has been unobtrusively installed to add strength without getting in the way, and a new headliner was installed at the same time. There’s a new carpet set on the floor and the dash is stuffed full of AutoMeter Ultralight gauges. The C6 is controlled by a trick B&M shifter mounted on top of the transmission tunnel for easy access and quick manual shifts if that’s what you’re into. A set of new cobra-embroidered floor mats matches the embroidery on the door panels, which proudly advertise this as a 521 Super Cobra Jet.

This is another one of those very impressive cars that you just couldn’t duplicate for the asking price. The engine alone is a $10,000 piece, and all the fabrication and modifications required to get it into the Mustang’s engine bay must not have been easy. This Mustang is a great blend of brutal performance with some modern touches, as if Ford had built a new 1970 Mustang today. The color, the interior, the 4-wheel disc brakes all fit right in with today’s hardware, but the shape of the body and the potent power plant under the hood all point to the greatest year of the muscle car era.

At the time of this posting this car is for sale, even when it sells this postings staying here, this is just to hot to not have on Mach 1 Club!
   
Best of Show Automotive • 7700 Tyler Blvd., Mentor, Ohio 44060 • Phone: (440) 350-1480


http://www.youtube.com/watch?v=sGFnai1goh0

   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

Reply
#2
That is on beautiful car Drool1Drool1 i think i found the color i want to paint mine, only thing missing is flat black hood

thanks for posting this Goodpost
Reply
#3
I aim to please! Glad you liked it. I did to! Wish it was in my garage! Laughing
Reply
#4
(08-24-2010, 04:15 AM)First Blood Wrote: That is on beautiful car Drool1Drool1 i think i found the color i want to paint mine, only thing missing is flat black hood

thanks for posting this Goodpost

i agree, it needs the hood accents!
Reply
#5
nice piece
Reply
#6
Nice car but not alot left that makes it a Mach.
Reply
#7
That 1970 Ford Mustang Mach 1 looks fantastic. By the way, I've only seen some Mickey Thompson rims. Is there anyone here who can give a feedback on the tires? Not sure if those are the drag radials in the Mach.
Reply
#8
Why does the article refer to it as a Mach 1?  I see a 1970 sports roof with funky paint and interior.  Typical aftermarket Magnum 500 wheels.  Stance is out of whack.  Wheel and tire sizes are wrong.  If it was a Mach 1 somebody stripped every little piece of trim, badging and interior and exterior finish it would have as a Mach 1.  The original Mach 1 exterior paint, graphics, trim, and interior are nicer looking than that car currently has.  Personally, I don't like it.  But, it's Resale Red, so it will probably sell.
Reply
#9
I've got to agree with you.  (69 Mach1) It looks out of balance, as if things don't quite fit well with each other??? Rear tires way to wide for the wheels, and to damn big, the fronts look sucked in, The interior is way over done and I sure don't like the graphics. It has lost it's I identity! Oh and I really don't like the color. Just my Thoughts. 

JTS
Reply
#10
I don't like throwing rocks at glass houses but I am in agreement with Mike (1969 Mach 1) and JTS. There are definitely things that don't look right with the car but all easily correctible.  I am sure those seats feel like a Lazy Boy recliner but they never look correct in the 60's/70's muscle car. I would still take car in a heartbeat!
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  A Collectors Dream: The 1969 Mach 1 Mach 1 Club 13 35,271 06-05-2015, 04:03 AM
Last Post: Dave R.
  My Mach 1 mason1958 6 17,111 06-04-2015, 02:40 AM
Last Post: mrmach1
  69 Mach 1 S Code Mustangmike 9 25,897 06-04-2015, 02:35 AM
Last Post: mrmach1
  My 69 Mach 1 Oneshot976 14 38,690 06-04-2015, 02:30 AM
Last Post: mrmach1
  1969 Mach Winter Blue 351W 4 Speed ac,ps,pb Shaker 69 Stang 6 18,853 06-04-2015, 02:16 AM
Last Post: mrmach1
  1969 Ford Restored Indian Fire Mach 1 390 4-Speed Mach 1 Club 12 36,097 06-04-2015, 02:10 AM
Last Post: mrmach1
  My first car...69 Mach 1 edPV 12 29,205 03-07-2015, 06:05 PM
Last Post: Dan B
  1969 Mach 1 428 CJ 4SPD swags63 3 12,295 09-20-2013, 08:51 AM
Last Post: JTS71 Mach1
  1970 Mach 1 Mustang - Reaching for your dreams! Mach 1 Club 3 12,856 05-02-2013, 02:17 AM
Last Post: Steven Harris
  1970 Mach 1 Restomod Finally Done! Petrolhead 4 13,895 11-06-2012, 11:12 AM
Last Post: Petrolhead

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238032
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150590
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1678
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3953
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1992
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1464
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 156974
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2990
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1497
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1468
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8681
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1718
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21065
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15074

>