How to Install an '05-'06 Shaker Hoodscoop
#1
Classic Design Concepts shakes up the new S197 Mustang
From the May, 2009 issue of Mustang Monthly

This is more or less what you'll see when you open the box: a pre-assembled cast-aluminum scoop atop a vacuum-formed ABS engine cover, with "Mustang" badges and discharge duct attached. We say "more or less" because the finish on this late prototype base/engine cover is a bit glossier than typical, and the discharge duct is also in prototype form and will have less noticeable plastic-weld joints in production kits.
Mump 0602 Classic Design Concepts S197 Mustang Shaker 03 Z

CDC's '05 Shaker: What a perfect complement to the S197's late-'60s styling cues. Like the original, it's functional, and installation couldn't be simpler.

The Shaker needs little introduction. Ford thought it was a better idea on the original Cobra Jet Mach 1. George Huisman and crew at Classic Design Concepts (CDC) revived the idea a few years ago with versions for the SN95 and New Edge cars, and Ford once again picked up the ball and ran with it on the tasty '03 Mach 1. Now we have the S197 GT with its distinctly '60s front-end design impressions. So guess what? It's Shaker time once again.

Many of you are no doubt familiar with CDC's SN95 or New Edge Shaker systems, as they've been hugely popular both in these pages and in the marketplace. And with good reason, since CDC stayed faithful to the original '69 scoop design and packaged a high-quality kit around it. For its '05 design, the company continues use of the textured black cast-aluminum Shaker scoop itself, but mounts it on a base that doubles as a stylish engine cover, hiding some of the industrial look of the S197 GT's stock underhood landscape. Better yet, the new kit is fully functional, rushing ambient air to the factory airbox via included ductwork. The kit even includes a high-flow replacement air filter and a plate to block off the factory underhood air inlet, helping reduce the temperature of the incoming air charge.

READ FULL STORY HERE
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  How to install a aftermarket throttle body on the 03/04 Mach 1 Victor.Gorea 0 10,156 08-26-2013, 12:47 AM
Last Post: Victor.Gorea
  Hot to install a JLT RAM/COLD air intake on 03/04 Mach1 Victor.Gorea 0 9,377 07-24-2013, 10:19 PM
Last Post: Victor.Gorea
  How to install Intake gaskets (easy stuff) Mach 1 Club 0 7,709 07-23-2013, 05:06 AM
Last Post: Mach 1 Club
  VIDEO - How to install a pitman arm nut: 1972 Ford Mustang Fastback Mach 1 Club 0 9,409 01-01-2012, 09:04 AM
Last Post: Mach 1 Club
  How To Install Rear Disc Brakes: From Drums to Discs Mach 1 Club 1 10,589 03-13-2011, 11:43 PM
Last Post: 1969jimmach
  Install headliner in Mustang thundertc64 4 20,232 02-01-2011, 09:12 AM
Last Post: thundertc64
  Install Auto Carpet in a Ford Mustang Mach 1 Club 0 9,325 09-21-2010, 03:25 AM
Last Post: Mach 1 Club
  How To: Install an Export Brace and a Monte Carlo Bar Mach 1 Club 0 7,913 07-31-2010, 07:38 AM
Last Post: Mach 1 Club
  How To: Install Subframe Connectors Mach 1 Club 0 8,188 07-31-2010, 07:13 AM
Last Post: Mach 1 Club
  Converting Your Mustang To A Shaker Hood Takes Time, Patience, And Money Mach 1 Club 0 8,537 07-23-2010, 01:52 PM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238059
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150859
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1688
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3957
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9109
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1995
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1466
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157028
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2995
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1498
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1473
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8717
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1719
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21264
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1685
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15080

>