06-24-2010, 03:15 AM
I'm new to the site. I thought some may be interested in the dyno results for the engine going into my 72 mach that I am restoring.
Peak HP @ 6400 RPM=529
Peak TQ @ 4900 RPM=496
Torque is at or above 450 lb/ft from 3000 RPM through 6000 RPM
It is 408 CID, 351C-4V closed chamber heads,9.5:1 CR, solid flat tappet cam, dual plane blue thunder intake, 750 CFM Holley HP.
Peak HP @ 6400 RPM=529
Peak TQ @ 4900 RPM=496
Torque is at or above 450 lb/ft from 3000 RPM through 6000 RPM
It is 408 CID, 351C-4V closed chamber heads,9.5:1 CR, solid flat tappet cam, dual plane blue thunder intake, 750 CFM Holley HP.