351c wont start, help
#72
Use the Fel Pro performance gaskets, and forget the belly pan. If the intake has a heat passage block it off. I'm not a hundred percent sure, but I don't remember my 351 Cleveland heads, or the intake, having a heat passage??? God I wish I could remember all this stuff better. But you don't need either one. Plus the gaskets should be more forgiving then the metal pan where the heads, and intake meet. Especially if they have been milled a couple times. Most modern intake gaskets, have the blue silicone sealing lines on them. If they do. "Do Not" use any sealant or glue, to hold them in place, as this will cause leaks, with the sealing lines on the gasket. Hope it helps. 

JTS
Reply


Messages In This Thread
351c wont start, help - by My70mach1 - 11-22-2018, 11:47 AM
RE: 351c wont start, help - by JTS71 Mach1 - 11-22-2018, 01:52 PM
RE: 351c wont start, help - by 1969_Mach1 - 11-22-2018, 02:06 PM
RE: 351c wont start, help - by Mustangmike - 11-22-2018, 11:16 PM
RE: 351c wont start, help - by My70mach1 - 11-23-2018, 12:32 AM
RE: 351c wont start, help - by JTS71 Mach1 - 11-23-2018, 01:35 AM
RE: 351c wont start, help - by 1969_Mach1 - 11-23-2018, 04:11 AM
RE: 351c wont start, help - by JTS71 Mach1 - 11-23-2018, 03:00 PM
RE: 351c wont start, help - by My70mach1 - 11-24-2018, 08:38 AM
RE: 351c wont start, help - by My70mach1 - 11-24-2018, 09:32 AM
RE: 351c wont start, help - by 1969_Mach1 - 11-24-2018, 10:15 AM
RE: 351c wont start, help - by My70mach1 - 11-24-2018, 10:34 AM
RE: 351c wont start, help - by Mustangmike - 11-24-2018, 11:20 AM
RE: 351c wont start, help - by Mustangmike - 11-24-2018, 10:36 AM
RE: 351c wont start, help - by My70mach1 - 11-24-2018, 11:03 AM
RE: 351c wont start, help - by My70mach1 - 11-24-2018, 11:05 AM
RE: 351c wont start, help - by Mustangmike - 11-24-2018, 11:24 AM
RE: 351c wont start, help - by My70mach1 - 11-24-2018, 11:37 AM
RE: 351c wont start, help - by 1969_Mach1 - 11-24-2018, 02:23 PM
RE: 351c wont start, help - by Mustangmike - 11-24-2018, 09:35 PM
RE: 351c wont start, help - by 1969_Mach1 - 11-25-2018, 02:40 AM
RE: 351c wont start, help - by Mustangmike - 11-25-2018, 03:36 AM
RE: 351c wont start, help - by My70mach1 - 11-25-2018, 04:30 AM
RE: 351c wont start, help - by My70mach1 - 11-25-2018, 04:53 AM
RE: 351c wont start, help - by 1969_Mach1 - 11-25-2018, 05:23 AM
RE: 351c wont start, help - by My70mach1 - 11-25-2018, 06:28 AM
RE: 351c wont start, help - by 1969_Mach1 - 11-25-2018, 06:47 AM
RE: 351c wont start, help - by Mustangmike - 11-25-2018, 06:31 AM
RE: 351c wont start, help - by My70mach1 - 11-25-2018, 06:58 AM
RE: 351c wont start, help - by 1969_Mach1 - 11-25-2018, 07:44 AM
RE: 351c wont start, help - by Mustangmike - 11-25-2018, 08:06 AM
RE: 351c wont start, help - by 1969_Mach1 - 11-25-2018, 11:48 AM
RE: 351c wont start, help - by Mustangmike - 11-25-2018, 01:01 PM
RE: 351c wont start, help - by 1969_Mach1 - 11-25-2018, 01:28 PM
RE: 351c wont start, help - by My70mach1 - 11-25-2018, 02:01 PM
RE: 351c wont start, help - by 1969_Mach1 - 11-25-2018, 02:41 PM
RE: 351c wont start, help - by Mustangmike - 11-25-2018, 10:01 PM
RE: 351c wont start, help - by 1969_Mach1 - 11-26-2018, 03:47 AM
RE: 351c wont start, help - by Mustangmike - 11-26-2018, 06:13 AM
RE: 351c wont start, help - by My70mach1 - 11-25-2018, 02:07 PM
RE: 351c wont start, help - by My70mach1 - 11-30-2018, 09:45 AM
RE: 351c wont start, help - by 1969_Mach1 - 11-30-2018, 11:15 AM
RE: 351c wont start, help - by JTS71 Mach1 - 11-30-2018, 12:18 PM
RE: 351c wont start, help - by 1969_Mach1 - 11-30-2018, 03:31 PM
RE: 351c wont start, help - by My70mach1 - 12-01-2018, 10:45 AM
RE: 351c wont start, help - by JTS71 Mach1 - 12-01-2018, 12:40 PM
RE: 351c wont start, help - by 1969_Mach1 - 12-01-2018, 01:18 PM
RE: 351c wont start, help - by Mustangmike - 12-01-2018, 09:00 PM
RE: 351c wont start, help - by 1969_Mach1 - 12-02-2018, 04:06 AM
RE: 351c wont start, help - by Mustangmike - 12-02-2018, 05:37 AM
RE: 351c wont start, help - by 1969_Mach1 - 12-03-2018, 06:41 AM
RE: 351c wont start, help - by My70mach1 - 12-03-2018, 06:58 AM
RE: 351c wont start, help - by 1969_Mach1 - 12-03-2018, 07:01 AM
RE: 351c wont start, help - by My70mach1 - 12-03-2018, 08:28 AM
RE: 351c wont start, help - by 1969_Mach1 - 12-03-2018, 09:07 AM
RE: 351c wont start, help - by My70mach1 - 12-03-2018, 09:33 AM
RE: 351c wont start, help - by 1969_Mach1 - 12-03-2018, 09:59 AM
RE: 351c wont start, help - by Mustangmike - 12-03-2018, 11:28 AM
RE: 351c wont start, help - by My70mach1 - 12-03-2018, 11:33 AM
RE: 351c wont start, help - by Mustangmike - 12-03-2018, 12:06 PM
RE: 351c wont start, help - by My70mach1 - 12-03-2018, 11:34 AM
RE: 351c wont start, help - by My70mach1 - 12-03-2018, 12:31 PM
RE: 351c wont start, help - by 1969_Mach1 - 12-03-2018, 06:35 PM
RE: 351c wont start, help - by My70mach1 - 12-13-2018, 10:36 AM
RE: 351c wont start, help - by 1969_Mach1 - 12-13-2018, 11:04 AM
RE: 351c wont start, help - by My70mach1 - 12-13-2018, 11:06 AM
RE: 351c wont start, help - by My70mach1 - 12-15-2018, 09:25 AM
RE: 351c wont start, help - by 1969_Mach1 - 12-15-2018, 12:12 PM
RE: 351c wont start, help - by Mustangmike - 12-15-2018, 10:57 PM
RE: 351c wont start, help - by My70mach1 - 12-16-2018, 03:21 AM
RE: 351c wont start, help - by 1969_Mach1 - 12-16-2018, 05:43 AM
RE: 351c wont start, help - by JTS71 Mach1 - 12-16-2018, 08:26 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  351c head gasket installation tips Sandman5000 20 49,422 10-08-2015, 07:08 PM
Last Post: Mach1FatherFigure
  I have spark, fuel, but wont start. Mcanical 13 34,444 01-31-2015, 04:30 AM
Last Post: Dave R.
  Ford 351C 4-V Marketing Manual Mach 1 Club 7 26,477 02-27-2014, 08:41 PM
Last Post: Mustangmike
  351C Upgrade Carb norcal510 14 38,146 02-27-2014, 02:26 AM
Last Post: djjsc
  351C addons - OLD MAGAZINE ARTICLE Mach 1 Club 0 7,952 01-06-2014, 04:32 AM
Last Post: Mach 1 Club
  Tips on dropping in a 351c into a 70 Mach 1 Monticore 6 20,474 07-09-2013, 02:20 AM
Last Post: Steven Harris
  351C Stroker Kits & Projects Mach 1 Club 15 45,065 06-29-2013, 03:01 PM
Last Post: furray
  Plastigage, 351C- tolerance help Monticore 6 21,979 09-20-2012, 07:53 AM
Last Post: Monticore
  351C 2V intake seal leak. but why??? travisgm 4 15,466 08-05-2012, 08:05 PM
Last Post: Oztrailer
  351C 2V johnanthony 2 11,540 07-29-2011, 05:02 AM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238051
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150851
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1685
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3957
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9109
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1995
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1466
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157019
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2993
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1498
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1472
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8715
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1719
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21263
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1682
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15079

>