10-02-2017, 08:48 AM
How to Remove Transmission Fluid Stains from Your Driveway
Transmission fluid spills or leaks may leave a bright red stain on light-colored concrete. Here are some suggested steps for removing the stain
- Spray the stain with oven cleaner and let it sit for 10 minutes.
- Use a stiff brush to scrub the spot and rinse with a hose at its highest pressure.
- If the stain is still there repeat the process.
Spilled gasoline not only leaves stains on your paved driveway; the marks are likely accompanied by an odor you’ll want to neutralize.
- Put on protective gloves and goggles.
- Soak a fresh gas spill with cat litter, baking soda or commercial absorbents.
- Sweep the soiled litter or absorbent into a coffee can with a lid. Talk to your local fire department about how to properly dispose of it.
- Scrub the stain with a mixture of dishwasher liquid and water. Let it soak in for a few minutes before rinsing with a hose.
- If that doesn’t take care of the problem, Good Housekeeping suggests buying trisodium phosphate from a hardware store, mixing it with warm water and scrubbing the spill with the solution until the stain lightens.