!971 Musntag Mach 1 Inspection tips
#1
Okay gang,

going to check out a 1971 Mach 1 with a 351 Clevelend this upcoming weekend. Putting together of check list of key inspection points. I already have a pretty good list, but can anybody give me some input of what they would consider important areas to inspect and things to look for. I've done a lot of homework on the car, but have yet to see it or drive it in person.
Reply
#2
If it is an unrestored car look for rust!! Inspect frame rails, torque boxes, cowl, bottom of doors and floor pans; all vulnerable areas for Mustangs.

If it is a restored car still check for rust as well as proper panel alignment. Large gaps and panels that do not align could mean below average restoration work or prior accident. You really want to see straight lines when you sight the car.

I am positive other members will chime in on other areas to look at.

Good luck and let us know how it goes.

Reply
#3
Depending on what price range of car you are looking at will depend on how deep you might have to look to find "covered" damage from age or from abuse.

I would start with a careful cowl inspection. If the cowl is rusted out and they have not properly repaired the rust damage there and are still asking big money then walk away - they have not properly fix any other damage as well.

If I was spending big money for a car I would not want a whole lot of rust repair. Spend a little money and travel to where rust free cars can be found.

If that is not an option then look for quality work - if it is obvious from inside the trunk or from under the car then it is not quality work. If quarter panels have been repaired look to see if the inner wheel wells were also properly repaired.

Look for damage on the radiator support to tell the story of prior front end accident damage. Look at the cross member under the oil pan for "air time" abuse.

Perhaps more than anything - read the seller. Is he being upfront and honest or is it all just a pack of lies. Is he an enthusiast or just trying to make money on a nice paint job?

Anyway, let us know how it turns out and take some pictures to share and the car will be critiqued for you.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  smooth window operation on 70 Mach CUSTOMMISER 2 1,468 08-15-2022, 12:10 PM
Last Post: CUSTOMMISER
  Is your Mach 1 on Google Earth Street View? Rare Pony 2 1,876 03-05-2022, 07:30 AM
Last Post: Rare Pony
  72 Mach 1 Power Steering Pressure Hose Jelly 1 2,941 11-07-2021, 08:42 AM
Last Post: JTS71 Mach1
  Turn signal electrical issue 1970 Mach 1 flananuts 2 2,547 10-21-2021, 09:01 PM
Last Post: flananuts
  '03 Mach 1 fuel pump skidmarky 1 2,725 04-29-2021, 11:06 PM
Last Post: JTS71 Mach1
  69 Mach 1 rear seat install RostaRob 8 18,608 06-29-2019, 02:44 AM
Last Post: rindel
  How much of your Mach 1 have you replaced? Mister 4x4 8 18,283 07-13-2018, 08:45 AM
Last Post: Steven Harris
  1970 Mach 1 Hood tach rlincoln0814 15 30,091 03-08-2018, 03:53 AM
Last Post: 1969_Mach1
  69 MACH 1 fuel cap? noroz 6 20,607 06-06-2015, 03:51 AM
Last Post: 1969_Mach1
  04 Mach 1 exhaust rattle Bogie#7 11 31,155 05-30-2015, 05:47 PM
Last Post: 1969_Mach1

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238033
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150592
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1679
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3953
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1992
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1464
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 156978
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2990
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1497
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1468
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8681
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1718
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21110
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15075

>