1969 heater box defrost/heat flapper gets stuck - Printable Version +- Mach 1 Club (https://mach1club.com) +-- Forum: Mustang Mach 1 Forums (https://mach1club.com/forumdisplay.php?fid=5) +--- Forum: 1969 - 1970 MUSTANG MACH 1 FORUMS (https://mach1club.com/forumdisplay.php?fid=6) +---- Forum: Electrical (https://mach1club.com/forumdisplay.php?fid=28) +---- Thread: 1969 heater box defrost/heat flapper gets stuck (/showthread.php?tid=6017) |
1969 heater box defrost/heat flapper gets stuck - rindel - 12-21-2014 I have a non ac heater box and I just recently removed it, cleaned it, and bough seal kit. I did not see a new rubber in the seal kit or any seal kits that you can purchase online to replace the flapper rubber for defrost/heat. It seems this flapper does not come out either as it is welded to flapper. Any advise on best way to loose flapper up? I read lubricant would collect dust over time. Some mentioned graphite and other mentioned trimming rubber. Wondering if anyone has some tricks with this. Would be great to remove it. RE: 1969 heater box defrost/heat flapper gets stuck - Mach1FatherFigure - 12-22-2014 Any chance of a photo? RE: 1969 heater box defrost/heat flapper gets stuck - Desy141 - 11-14-2017 Hello everybody! I am also interested in answering this question. 192.168.1.1 - 192.168.1.1 login admin |