Vacuum Tree Hose Connections? - Printable Version +- Mach 1 Club (https://mach1club.com) +-- Forum: Mustang Mach 1 Forums (https://mach1club.com/forumdisplay.php?fid=5) +--- Forum: MACH 1 TALK & TROUBLESHOOTING (https://mach1club.com/forumdisplay.php?fid=202) +--- Thread: Vacuum Tree Hose Connections? (/showthread.php?tid=5718) |
Vacuum Tree Hose Connections? - RonC - 05-24-2014 In my reassembly of my 70 Mach 1engine compartment I cannot remember the hose connections going to and from the vacuum tree that is located on the engine compartment firewall. (My car has not been together for over 9 years.) The vacuum tree has 6 ports of which 2 are larger. I'm assuming that the larger ports are used to provide manifold vacuum thru the tree to the power brake booster, but I am not sure. My car has power brakes, AC, a heater water control valve and carbon canister which all should use vacuum in some way. I cannot find any of this info in either the Ford shop manual or the Mustang Restoration Guide. I would appreciate it if anyone can provide a description or photo of the hose routings to and from the vacuum tree. This is the vacuum tree. [attachment=9991] RE: Vacuum Tree Hose Connections? - Mustangmike - 05-24-2014 Since there are six possible connections and 3 are blocked off, I am guessing the remaining ports "possibly" go to the intake manifold, transmission, and brake booster. Any other suggestions. RE: Vacuum Tree Hose Connections? - RonC - 05-24-2014 I may have found the answer in the MRE books wiring and vacuum diagrams. Looks like larger connections are to the intake manifold and power brake booster as I suspected. The smaller open connection goes to the second port on the carbon canister. The remaining 3 smaller ports are unused. If anyone has different connections on their car, please post what you have. Thanks, Ron P.S. It also seems I installed the vacuum tree upside down as shown in my photo. At least I had a 50-50 chance! LOL. |