+- Mach 1 Club (https://mach1club.com)
+-- Forum: Mach 1 Club Member Area (https://mach1club.com/forumdisplay.php?fid=1)
+--- Forum: WHAT HAVE YOU DONE TO YOUR MACH 1 TODAY? (https://mach1club.com/forumdisplay.php?fid=234)
+--- Thread: 69 351W -> 410 stroker (/showthread.php?tid=5617)
Pages:
1
2
69 351W -> 410 stroker - Must69ang - 03-02-2014
Gotta have that torque. This year's project is stroking the 351w to a 410 and adding roller rockers and cam. Progress so far..
(ps - sorry, I'll have to dial-down the resolution on the camera a bit - these are a bit huge for web posts)
RE: 69 351W -> 410 stroker - Steven Harris - 03-02-2014
That ought to make a very respectable difference.
Do you have numbers that you are shooting for?
RE: 69 351W -> 410 stroker - Mustangmike - 03-02-2014
Sweet...it looks like you are doing it right as the pictures speak for themselves! I believe I read this Carroll Shelby quote online from another member here: "Horsepower sells cars but torque wins races"
Keep up the good work and let us know what numbers you are looking to produce. We are curious.
RE: 69 351W -> 410 stroker - Must69ang - 03-03-2014
Thanks. I'm hoping for around 500 ft-lbs of torque but I'm not sure I'll have the $400 at the end of this for the dyno session. We'll see...
RE: 69 351W -> 410 stroker - JTS71 Mach1 - 03-03-2014
My question is what kind of compression are you shooting for? As it looks like it's gonna be low with those "swimming pool" pistons. Man those are big dishes???
Compression makes things go bang! More compression more bang! Unless you're thinking of BOOST??? Just an observation. JTS 71 Mach1
RE: 69 351W -> 410 stroker - Must69ang - 03-04-2014
Around 9.5/1 compression. Cam is Howards 225/229. The aim is for dependability, non-racing gas, non-zinc oil and an idle that doesn't make it seem like I want to race everyone I pull up next to at a light.
RE: 69 351W -> 410 stroker - JTS71 Mach1 - 03-04-2014
Gotcha, More of a sneak attack then let the torque do all the work!
JTS 71 Mach1
RE: 69 351W -> 410 stroker - 70Mach1 - 09-04-2014
How goes the stroker motor? This is what I'd like to do to my car as well.
RE: 69 351W -> 410 stroker - Must69ang - 09-06-2014
(09-04-2014, 11:27 AM)70Mach1 Wrote: How goes the stroker motor? This is what I'd like to do to my car as well.
I'm absolutely loving it. Would do it again in a heartbeat. Here's a short video. The other videos on my channel are a bit longer.
https://www.youtube.com/watch?v=xMwkwXjkLmA
RE: 69 351W -> 410 stroker - Mustangmike - 09-06-2014
Yeah baby!! No doubt the cars hauls a**. Enjoy it
!